Friday, May 11, 2012


PolyCare Cleaner is the safe effective cleaner for polyurethane coated surfaces. PolyCare is formulated to clean effectively, without leaving any soapy haze or residue on the floor. Ideal for all polyurethane treated, factory pre-finished and laminated residential and commercial/sports floors, as well as cabinets, furniture, railings, counters and woodwork. PolyCare has a unique detergent formula which cleans effectively without rinsing. Light, fresh scented PolyCare leaves only the beauty of fine wood, not a lingering odor and never a residue.

Product Properties
Color: Clear Yellow
VOC :Not Applicable
Freeze Thaw Stability: Stable
Flashpoint: Not Applicable

The floor should be swept or vacuumed prior to cleaning for optimum results. Mix PolyCare with warm water at a ratio of 2 ounces per gallon of water. We recommend using a good quality mop, or for large surfaces, several large cotton towels. When using a mop, make sure to ring it out so not to flood the surface with water. Damp mop, rinsing as often as needed. When using towels, soak the towels in the bucket of PolyCare solution. Make sure that they are thoroughly wet. Wring out a towel to remove excess moisture until it is just damp. Wrap the towel around a broom and wipe the floor, going with the grain of the wood, until the floor is completely free of dirt. If spot cleaning is desired, pour the mixed PolyCare solution into a clean spray bottle. Don’t spray the mixture directly on the surface, but on a rag, sponge or towel, before wiping.

Do not apply PolyCare Cleaner from the bottle directly to the wood surface. Excess liquid may be absorbed by the wood fibers, and may damage or discolor the wood surface. PolyCare has been formulated for use on polyurethane coated surfaces, it is not recommended for use on wax, wax impregnated, or unfinished wood surfaces.

No comments: